RS600 Cocoon Cover

RS600 Cocoon Cover

A cocoon cover which makes towing easy, and saves your top cover for only when your mast is up.

£279.00

RS600 Top Cover

RS600 Top Cover

Polycotton breathable top cover.

£249.00 In stock

RS600 Undercover

RS600 Undercover

A standard nylon under cover.

£159.00 In stock

RS600 Padded Daggerboard Bag

RS600 Padded Daggerboard Bag

Padded Daggerboard bag with Velcro closure to fit the RS300, RS400 and RS600 daggerboard.

£45.00 available to order

RS600 Padded Rudder Bag Long

RS 600 Padded Rudder Bag Long

Padded rudder bag with Velcro closure to fit The RS300, RS400 and RS600 rudder blade.

£45.00 available to order

275 Road Base

275 Road Base

A road base to fit RS600 and RS800 trolleys. Features mast support and 8” wheels..

£755.00

RS300 Launching Trolley

RS600 Launching Trolley

The standard RS600 trolley fits a 275 trailer.

£369.00

NO PICTURE AVAILABLE

Allen 30mm Dynamic Block

The 30mm dynamic block will easily handle maximum loads and give unrivalled performance – Line friendly soft contours and articulation – Stainless steel cheeks and inner bearing systems handle maximum loads.

£9.58 In stock

RS600 Control Line Cleat

RS600 Control Line Cleat

Allen cam cleats have had over 50 years of meticulous R&D to perfect their design. Alanite the jaw profile optimizes rope entry and exit for smooth cleating and uncleating, whilst double coil springs and ball bearing technology give consistent cam action. The addition of the ultra-prolead with optional wire reinforcement enhances cleating angles for superior performance and longevity.

£21.52 In Stock

RS300 Main halyard

RS300 Main halyard

A pre-cut RS600 main halyard 14m long. Made from 4.5mm covered Kevlar.

£21.00 In stock

RS600 Mainsheet

RS600 Mainsheet

RS600 Mainsheet, standard as supplied on a new boat.

£13.91 Available to order

RS Aluminium Tiller Extension

RS Aluminium Tiller Extension (Choose 2.1m for RS600)

RS aluminium tiller extension, choose the length you require. Includes Seasure universal joint.

£52.60

RS600 Carbon Tiller Extension

C2 Marine Carbon Tiller Extension (Complete with universal joint)

 

£113.60 available to order

Seasure Slick Release tiller Extension Joint

Seasure Slick Release tiller Extension Joint

Simple design, innovative features and start of the art materials give the Slick Release secure holding of the tiller extension on the tiller whilst still maintaining its simple to remove objective. The extension joint is completely captured within the fitting. This means that even if the fitter were left in the open position when out on the water, the tiller extension will not fall out.

£7.80 In stock

RS600 Tiller Extension Universal Joint

RS600 Tiller Extension Universal Joint

Seasure twist off universal joint. Used on RS Vareo, RS range.

£7.60 In Stock

RS600 Hull Wing Plug

RS600 Hull Wing Plug

RS600, RS700 and RS800 wing end plug which attaches the wing to the hull.

£10.22 in Stock

RS600 Front Wing U Bolt

RS600 Front Wing U Bolt

RS600 front wing U Bolt. RS800 wing U bolt used at front and back of the wings.

£16.95 In Stock

RS600 Rudder Blade

RS600 Rudder Blade

Rudder blade used on the RS300, RS400 and RS600. Not supplied with rudder stock.

£319.00 available to order

RS600 Rudder stock and Tiller

RS600 Rudder stock and Tiller

Rudder stock and tiller. Used on RS100, RS300, RS400 and RS600.

£169.00 available to order

RS600 Rudder Gudgeon

RS600 Rudder Gudgeon (choose 38mm, 3 hole)

Seasure rudder stock gudgeons. Choose 38mm, 3 hole version.

£12.19 In stock

RS600 Rudder Pintle

RS600 Rudder Pintle

A rudder stock pintle to fit Rudder stocks for the RS300.

£18.74 In Stock

NO PICTURE AVAILABLE

RS600 Lacing Eye for Control Lines on Wing

RWO short offset clip.
Length 16mm, fixing hold size 5mm

£1.73 In stock

Rudder stock (Pintle & Gudgeon) Nut, Bolt and Washer

Rudder stock (Pintle & Gudgeon) Nut, Bolt and Washer

This stock bolt is used to attach the rudder pintle or gudgeon to the rudder stock.

£0.75 In stock

Rudder Stock and Roller and Pin

Rudder Stock and Roller and Pin

Roller and pin, which fits inside the rudder stock which guides the rudder downhaul
Used on RS600

£8.43 available to order

RS600 Rudder Downhaul Cleat

RS600 Rudder Downhaul Cleat

A very strong alloy cleat. A nylon version is available C203 Rope size 3-6mm, material Aluminium, dimensions 82x18mm, hole spacing 66mm, bolt size M5 screw size 4.8mm weight 36g.

£5.33 In stock

RS600 Daggerboard

RS600 Daggerboard

Daggerboard to fit the RS300, RS600.

£399.00available to order

NO PICTURE AVAILABLE

RS600 lacing Eye for Cunningham Block

RWO large offset clip.
Length 25mm, fixing hold size 5mm.

£2.18 In stock

RS300 Toe strap Set

RS600 Rudder Pivot Bolt and Wing Nut

Rudder pivot bolt and wing nut also includes washer.

£8.74 In stock

RS600 Shroud Adjuster

RS600 Shroud Adjuster

Allen U shaped single lined shroud stay adjuster, used on RS Feva, Rs100, RS500, RS600 and RS700 (main shrouds).
Pin Dia. 5mm, Adjustment range 60mm, increments 9mm, internal width 8mm and weight 23g.

£3.10 in stock

RS600 Shroud Adjuster Heavy Duty version

RS600 Shroud Adjuster Heavy Duty version

Allen U shaped single lined shroud stay adjuster, Heavy duty version of the A4372.
Pin Dia. 5mm, Adjustment range 69mm, increments 9mm, internal width 8mm and weight 39g.

£5.37 Available to order

NO PICTURE AVAILABLE

RS600 Kicker Cascade

RS600 Kicker Cascade includes high load blocks.

£69.95 available to order

RS600 Kicker U Bolt

RS600 Kicker U Bolt (Built into Boat)

U bolt with 6mm road and 38mm hole centres. Used on RS500 as shroud u bolt and used on RS600 kicker u bolt which is built into boat.

£14.89 In stock

RS600 Mainsail Feeder for Superspar Mast

RS600 Mainsail Feeder for Superspar Mast

Sail track feeder on carbon masts, it is used on RS Vareo, RS300, RS600, RS700, RS800 9Holt mast track only and K6.

£11.90 In stock

RS600 Mast Head Sheave and Box

RS600 Mast Head Sheave and Box

RS mast head sheave and box used on RS Vareo, RS300, RS600 and RS700.

£14.30 In stock

NO PICTURE AVAILABLE

RS600 Mast step

 

£27.11 available to order

NO PICTURE AVAILABLE

RS600 Mast Rigged with Diamonds only available to order

 

 

£1630.82

NO PICTURE AVAILABLE

RS600 Spreader Bracket

 

£71.70
Temporarily out of stock

NO PICTURE AVAILABLE

RS600 Diamond Bottle Screw

5mm bottle screw with eyes on both ends. Used on RS600 as bottlescrew for diamond wires.

£20.63 available to order

RS600 Mast Heel Plug for SuperSpar mast

RS600 Mast Heel Plug for SuperSpar mast

 

£21.99 temporarily out of stock

NO PICTURE AVAILABLE

RS600 Trapeze Shockcord Deck Eye

RWO heavy duty medium deck clip. Hole size 14mm, Fixing hold size 5mm.

£0.73 In stock

Allen 20mm Dynamic Block

Allen 20mm Dynamic Block

The Allen 20mm dynamic bearing block is simply the best designed and engineered micro block on the market – Line friendly soft contours and articularion – stainless steel cheeks and inner bearing systems handle maximum loads – central hole for tie-on becket.
Sheave Dia. 20mm, Length 37mm Line Dia. 2.5-6mm, Shackle pin 4mm, Break load 540kg

£7.68 In stock

RS600 Control Line Cleat Wire Fairlead

RS600 Control Line Cleat Wire Fairlead

Allen cleat stainless steel front fairlead, works with A77 and A677 cleats.

£2.48 In stock

Allen Screw Bung & Socket

Allen Screw Bung & Socket

Allen screw bung and socket. Used as transom bung on RS Vareo, RS200, RS300, RS400, RS500, RS700 and RS800.

£2.99 In stock

RS600 Main Halyard Cleat

RS600 Main Halyard Cleat

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Rope size 3-6mm, material – aluminium, dimensions 82x18mm, hole spacing 66mm, bolt size M4, screw size 4.2mm weight 30g.

£7.14 In stock

Hawk Standard Mk 3

Hawk Standard Mk 3

The Hawk is the original Hawk Wind Indicator and sets the standard by which all wind indicators are judged. Lightweight with a balanced arm and the Hawk V jewel bearing surface this is the ultimate in Wind indicator technology. The Vane arm is made from super tough Nylon giving good rigidity and UV protection. The support rod is high grade aluminium allowing it to be bent if required or straight.

£21.40available to order

Allen Pro Flag

Allen Pro Flag

Allen Pro Flag to find out the direction of the wind. Fits normal burgee clip. Various colours.

£7.82 In stock

Falker Racing Burgee

Falker Racing Burgee

The Falker Burgee is widely known to be the best racing flag available. The flag is supported by a wire frame. It is also balanced to make it very accurate.

£12.00 available to order

Allen Burgee Clip

Allen Burgee Clip

Standard burgee clip which fits standard stainless steel shaft burgees. Inc. Allen Pro Flags and Falker Burgee.

£4.53 In stock

Pro Grip Self Adhesive 100mmx1400mm

Pro Grip Self Adhesive 100mmx1400mm

Self adhesive pro grip, sold in a roll 100x1400mm. The best grip available in wet conditions, and easy to fit in this convenient roll.
Used as standard on RS600, RS700 and RS800.

£9.95

NO PICTURE AVAILABLE

RS600 Wing Narrow Each

RS600 Wing Narrow each, includes pro grip.

£200.00
Please phone to order

NO PICTURE AVAILABLE

RS600 Wing Wide Each

RS600 Wing Wide each, includes pro grip.

£200.00
in stock

NO PICTURE AVAILABLE

RS600 Mainsail

RS600 Mainsail, includes battens, sail numbers, and sail bag.

£649.00
Available to order

NO PICTURE AVAILABLE

RS600 Batten Set

 

£38.46 available to order

NO PICTURE AVAILABLE

RS600 Mainsail Clew Block

RS400 and RS600 mainsail clew block, which runs along the bar inside the boom.

£21.85
Available to order

RS600 Mainsail Clew Shackle

RS600 Mainsail Clew Shackle

Pressed rigging link. Used for attaching mainsail clew on RS400 and RS600
Opening size 17mm, Length 43mm, pin diameter 5mm.

£3.71 In stock

RS Wide Trapeze Ring

RS Wide Trapeze Ring

Wide stainless steel trapeze ring, makes it easy to grab hold of. A favourite with trapeze sailors, good value.

£9.27 out of stock

NO PICTURE AVAILABLE

RS600 Forestay and Cleat

 

£31.45 In stock

NO PICTURE AVAILABLE

RS600 Shroud Trapeze Wire each

 

£41.95 avaiable to order

RS600 Trapeze Cleat

RS600 Trapeze Cleat

The cleat has a in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines.
Rope size 4-8mm, material – aluminium, dimensions 89x18mm, hole spacing 70mm, weight 42g.

£11.50 In stock

Seasure Trapeze Disc

Seasure Trapeze Disc

A plastic roller, 51mm diameter and 6mm hole.

£2.24 In stock

RS600 Forestay Purchase Block (Choose Bolt Thru Option)

RS600 Forestay Purchase Block (Choose Bolt Thru Option)

The 40mm dynamic bearing block is an essential piece of equipment with a range of applications suitable for mainsheet, jib, spinnaker and vang systems. It has been designed with a clever stainless steel anchor strap and Allen dynamic bearing technology for performance and durability.
Line friendly soft contours and articulation, stainless steel cheeks and inner bearing systems.

£21.70

RS600 Forestay U Bolt

RS600 Forestay U Bolt

U Bolt with 5mm rod and 28mm hole centres. Used on RS100 as shroud bolt, used on RS600 as a forestay U bolt.

£9.34 In stock

NO PICTURE AVAILABLE

RS600 Boom, fully rigged

 

£264.00 available to order

RS600 Mainsheet and kicker boom eye

RS600 Mainsheet and kicker boom eye

Selden Spinnaker Pole Dinghy Lift Eye. Used on RS800 boom for attaching mainsheet blocks and kicker.

£5.95 In stock

RS300 Boom Bolt

RS600 Boom Bolt

 

 £42.50 in stock

RS600 Transom Bung

RS600 Transom Bung

RWO screw bung, seal and socket.
Used as transom bung on RS600, Toppers and Laser.

£2.99 In stock

RS600 Transom Gudgeon (Choose 2 hole, with bush)

RS600 Transom Gudgeon (Choose 2 hole, with bush)

Seasure transom gudgeon. For gudgeon for the RS100 and RS600 choose the 2 hole with bush version.

£11.33 in stock

RS600 Transom Pintle (Choose 4 hole option)

RS600 Transom Pintle (Choose 4 hole option)

Seasure transom pintle.

£18.28 In stock

RS600 Outhaul Sheave Box

RS600 Outhaul Sheave Box

Selden spinnaker Halyard Sheave Box, ball bearing. Used on RS Vision, RS200, RS400, RS500 and 2000 as the spinnaker halyard sheave box. Used on RS100 and RS700 as the outboard sheave box on bowsprit.

£17.70 In stock

RS600 Rear Wing U Bolt

RS600 Rear Wing U Bolt

RS600 and RS700 rear wing U bolt.

£16.95 In stock

NO PICTURE AVAILABLE

RS600 Transom Bar

 

£39.95
Available to order

Tear Aid repair Kit Type A

Tear Aid repair Kit Type A

Tear aid is an air cured polyurethane patch/tape which has the benefit of not requiring any messy glue application. The product can be used to repair airbeds, awnings, tents, neoprene and rubber inner tubes to name but a few applications. The Tear patch is made from an exceptionally tough, matte finish abrasion resistant polyurethane elastomer which resists puncture and tearing.

£7.49 In stock

RS600 SAIL LOGO
available to order from £30.00 per pair

RS600 BOAT LOGO PACK
available to order in quality vinyl
updated logo authorised by
RS Sailing

£52.65 to order
Gelcoat 600g exc. Catalyst

Gelcoat repair kit

Kit contains clear gelcoat, catalyst, thickening powder and colour plus mixing cup and stick ideal for small gelcoat repairs

£20.00 In stock

Heavy Duty Dacron Repair Tape 2m x 100mm

Heavy Duty Dacron Repair Tape 2m x 100mm

A self adhesive polyamide fabric tape for semi-permanent sail repair. Seawater and weather resistant with very high ageing resistance – the tape is supple yet exceptionally strong.

£9.66 In stock

Mylar Repair Tape

Mylar Repair Tape

Remove the white release liner to expose a transparent repair tape for semi-permanent repairs to sail windows and mylar sails. U.V and salt water resistant.

£3.78 In stock