RS300 Cocoon Cover

RS300 Cocoon Cover

A cocoon cover which makes towing easy, and saves your top cover for only when your mast is up.

£279.00

RS300 Top Cover

RS300 Top Cover

Polycotton breathable top cover.

£259.00

RS300 Undercover

RS300 Undercover

A standard nylon under cover.

£179.00

RS Padded Daggerboard Bag

RS Padded Daggerboard Bag

 

£45.00

NO PICTURE AVAILABLE

RS 300 Padded Rudder Bag Long

Padded rudder bag with Velcro closure to fit the RS300 rudder blade.

£45.00

250 Road Base

250 Road Base

A road base to fit RS300. Features mast support and 8" wheels.

£745.00

RS300 Launching Trolley

RS300 Launching Trolley

The standard RS300 trolley fits a 250 trailer.

£429.00

RS Transom Trailer Kit

RS Transom Trailer Kit

Make attaching lighting board and mast easy with this transom trailer kit. Fits all RS boats except Tera and Elite. It clips straight onto the pintles on the back of the boat. It features a padded mast support and holes to bolt on a lighting board.

£38.00

RS300 mainsheet Block

RS300 mainsheet Block

The 40mm dynamic bearing block is an essential piece of equipment with a range of applications suitable for mainsheet, jib, spinnaker and vang systems. It has been designed with a clever stainless steel anchor strap and allen dynamic bearing technology for performance and durability.

£21.50 In stock

RS300 Main halyard

RS300 Main halyard

A pre-cut RS300 main halyard 13m long. Made from 3.5mm Evolution Kevlar.

£17.55 In stock

RS300 Mainsheet

RS300 Mainsheet

RS300 Mainsheet, standard as supplied on a new boat.

£13.91 In stock

RS Aluminium Tiller Extension

RS Aluminium Tiller Extension (For RS300 choose 1.45m)

RS aluminium tiller extension, choose the length you require. Includes Seasure universal joint.

£52.60 available to order

RS300 Stiff Stick Carbon Tiller Extension

 C2 Marine Carbon Tiller Extension (complete with universal joint)

 

£83.60 available to order

Seasure Slick Release tiller Extension Joint

Seasure Slick Release tiller Extension Joint

Simple design, innovative features and start of the art materials give the Slick Release secure holding of the tiller extension on the tiller whilst still maintaining its simple to remove objective. The extension joint is completely captured within the fitting. This means that even if the fitter were left in the open position when out on the water, the tiller extension will not fall out.

£7.80 In stock

RS300 Control Line Cleat

RS300 Control Line Cleat

Allen cam cleats have had over 50 years of meticulous R&D to perfect their design. Alanite the jaw profile optimizes rope entry and exit for smooth cleating and uncleating, whilst double coil springs and ball bearing technology give consistent cam action. The addition of the ultra-prolead with optional wire reinforcement enhances cleating angles for superior performance and longevity.

£13.99 In Stock

RS300 Control Line Cleat Wedge

RS300 Control Line Cleat Wedge

Allen wedge kit works with A77 and A677 cleats.

£0.93 In stock

RS300 Rudder Retaining Clip

RS300 Rudder Retaining Clip

Seasure stainless steel rudder retaining clip.

£3.00 In Stock

RS300 Rudder Blade

RS300 Rudder Blade

Rudder blade used on the RS300, RS400 and RS600. Not supplied with rudder stock.

£319.00 available to order

RS300 Rudder stock and Tiller

RS300 Rudder stock and Tiller

Rudder stock and tiller. Used on RS100, RS300, RS400 and RS600.

£169.00 available to order

RS300 Rudder Gudgeon

RS300 Rudder Gudgeon (choose 38mm, 3 hole)

Seasure rudder stock gudgeons. Choose 38mm, 3 hole version.

£19.23 In stock

RS300 Rudder Pintle

RS300 Rudder Pintle

A rudder stock pintle to fit Rudder stocks for the RS300.

£21.08 In Stock

RS300 Rudder Downhaul Block

RS300 Rudder Downhaul Block

This plain bearing budget block range is a suitable alternative to the Allen dynamic block range where performance and style is less important to the application.
Sheave Dia 20mm – length 39mm – Line Dia. 2-6mm
Break Load 400 kg – weight 10 gms

£4.36 In stock

Rudder stock (Pintle & Gudgeon) Nut, Bolt and Washer

Rudder stock (Pintle & Gudgeon) Nut, Bolt and Washer

This stock bolt is used to attach the rudder pintle or gudgeon to the rudder stock.

£0.75 In stock

Rudder Stock and Roller and Pin

Rudder Stock and Roller and Pin

Roller and pin, which fits inside the rudder stock which guides the rudder downhaul
Used on RS300

£8.43 In stock

RS300 Rudder Downhaul Cleat

RS300 Rudder Downhaul Cleat

A very strong alloy cleat. A nylon version is available C203 Rope size 3-6mm, material Aluminium, dimensions 82x18mm, hole spacing 66mm, bolt size M5 screw size 4.8mm weight 36g.

£5.33 In stock

RS300 Daggerboard

RS300 Daggerboard

Daggerboard to fit the RS300, RS600.

£399.00 available to order

RS300 Toestrap Bar Spacer

RS300 Toestrap Bar Spacer

Plastic spacer that goes underneath the toestrap plate. 5 needed per plate.

£0.40each In stock

RS300 Toe strap Set

RS300 Toe strap Set

RS300 Toe strap set.

£80.98 In stock

RS300 Toestrap Bar

RS300 Toestrap Bar

RS300 toe strap plate –Toe strap spacers may also be required.

£11.80 each In stock

RS300 Continuous Kicker Shackle

RS300 Continuous Kicker Shackle

Allen forged D shackle made from stainless steel.
Pin diameter 5mm, Opening size 10mm, Length 20mm, breaking load 950 kg.

£1.20 In stock

RS300 Main Halyard Take Up Inglefield Clip (pair)

RS300 Main Halyard Take Up Inglefield Clip (pair)

Small sized Inglefield clip sold as a pair.
Used on RS300 for securing main halyard.
Max Rope Dia 5mm, Length 26mm, Thickness 3mm and Weight 2g.

£2.32 In stock

NO PICTURE AVAILABLE

RS300 Boom Kicker Bars (Pair)

 

£22.49 In stock

NO PICTURE AVAILABLE

RS300 Boom Plastic Spacers

 

£1.51 In stock

RS300 Boom Pin C Clip

RS300 Boom Pin C Clip

 

£0.24 In stock

RS300 Mast Head Sheave and Box

RS300 Mast Head Sheave and Box

RS mast head sheave and box used on RS300.

£14.30 In stock

RS300 Mast step

RS300 Mast step

 

£34.95 In stock

NO PICTURE AVAILABLE

RS300 Mast A Rig – Fully Rigged

 

£1,424.29

NO PICTURE AVAILABLE

RS300 Mast B Rig – Fully rigged

 

£1,424.29

NO PICTURE AVAILABLE

RS300 Mast Deck Collar

 

£25.99 in stock

RS300 Mast Heel Plug

RS300 Mast Heel Plug

 

£18.50 In stock

NO PICTURE AVAILABLE

RS300 Mainsheet Lacing Eye on Deck

Forged stainless steel eye strap.
Fixing hole size 5mm – Hole spacing 33mm
Weight 6.4g

£3.10 In stock

RS300 Bow Deck Eye

RS300 Bow Deck Eye

27mm pressed stainless steel lacing eye.
Height 8mm, Fixing hole size 5mm, hole spacing 27mm weight 1.5g

£2.00 In stock

Allen 20mm Dynamic Block

Allen 20mm Dynamic Block

The Allen 20mm dynamic bearing block is simply the best designed and engineered micro block on the market – Line friendly soft contours and articularion – stainless steel cheeks and inner bearing systems handle maximum loads – central hole for tie-on becket.
Sheave Dia. 20mm, Length 37mm Line Dia. 2.5-6mm, Shackle pin 4mm, Break load 540kg

£7.68 In stock

RS300 Control Line Cleat Wire Fairlead

RS300 Control Line Cleat Wire Fairlead

Allen cleat stainless steel front fairlead, works with A77 and A677 cleats.

£2.48 In stock

Allen Screw Bung & Socket

Allen Screw Bung & Socket

Allen screw bung and socket. Used as transom bung on RS Vareo, RS200, RS300, RS400, RS500, RS700 and RS800.

£2.99 In stock

Hawk Standard Mk 3

Hawk Standard Mk 3

The Hawk is the original Hawk Wind Indicator and sets the standard by which all wind indicators are judged. Lightweight with a balanced arm and the Hawk V jewel bearing surface this is the ultimate in Wind indicator technology. The Vane arm is made from super tough Nylon giving good rigidity and UV protection. The support rod is high grade aluminium allowing it to be bent if required or straight.

£21.40 available to order

Allen Pro Flag

Allen Pro Flag

Allen Pro Flag to find out the direction of the wind. Fits normal burgee clip. Various colours.

£7.82 In stock

Falker Racing Burgee

Falker Racing Burgee

The Falker Burgee is widely known to be the best racing flag available. The flag is supported by a wire frame. It is also balanced to make it very accurate.

£12.00 In stock

Allen Burgee Clip

Allen Burgee Clip

Standard burgee clip which fits standard stainless steel shaft burgees. Inc. Allen Pro Flags and Falker Burgee.

£5.36 In stock

RS300 Mainsheet Swivel Base exc. Ratchet

RS300 Mainsheet Swivel Base exc. Ratchet

Allen have spent many hours of research and development with various boatuilders to perfect the angle and height of the cleat to optimize mainsheet jamming. Innovative light weight construction – dual ball race of maximum efficiency – optional click stops limit swivel rotation – line snags virtually eliminated.
Type: high
Fixings: M5

£117.00 In stock

RS300 Mainsheet Swivel Base inc. Ratchet

RS300 Mainsheet Swivel Base inc. Ratchet

Allen have spent many hours of research and development with various boatuilders to perfect the angle and height of the cleat to optimize mainsheet jamming. Innovative light weight construction – dual ball race of maximum efficiency – optional click stops limit swivel rotation – line snags virtually eliminated.
Type: high
Fixings: M5

£145.71 In stock

NO PICTURE AVAILABLE

RS300 Mainsail

RS300 Mainsail, new style, includes battens, and sail bag.

£555.00

 Numbers £2.35 each

NO PICTURE AVAILABLE

RS300 Batten Set

 

£22.61 available to order

RS300 Transom Bung

RS300 Transom Bung

Allen screw in bung and socket.

£2.99 In stock

RS300 Transom Gudgeon (Choose 4 hole, with bush)

RS300 Transom Gudgeon (Choose 4 hole, with bush)

Seasure transom gudgeon.

£12.08 In stock

RS300 Transom Pintle (Choose 4 hole)

RS300 Transom Pintle (Choose 4 hole)

Seasure transom pintle.

£18.28 In stock

RS300 Boom Bolt

RS300 Boom Bolt

 

£21.45 In stock

RS300 Boom Bobbin

RS300 Boom Bobbin

RS300 Boom bobbin, the roller that runs down the mast.

£45.00 In stock

RS300 Carbon Boom inboard end plates (pair)

RS300 Carbon Boom inboard end plates (pair)

RS300 carbon boom inboard end plates, Riveted onto the boom and attaches the boom to the mast via the boom bolt (boom bolt not included).

£15.95 In stock

Tear Aid repair Kit Type A

Tear Aid repair Kit Type A

Tear aid is an air cured polyurethane patch/tape which has the benefit of not requiring any messy glue application. The product can be used to repair airbeds, awnings, tents, neoprene and rubber inner tubes to name but a few applications. The Tear patch is made from an exceptionally tough, matte finish abrasion resistant polyurethane elastomer which resists puncture and tearing.

£7.49 In stock

 

 

Gelcoat 600g exc. Catalyst

Gelcoat repair kit

Contains clear gelcoat, catalyst, colour, thickening powder, cup and mixing stick, all you need to do those small surface gel repairs.

£20.00 In stock

Heavy Duty Dacron Repair Tape 2m x 100mm

Heavy Duty Dacron Repair Tape 2m x 100mm

A self adhesive polyamide fabric tape for semi-permanent sail repair. Seawater and weather resistant with very high ageing resistance – the tape is supple yet exceptionally strong.

£9.66 available to order

Mylar Repair Tape

Mylar Repair Tape

Remove the white release liner to expose a transparent repair tape for semi-permanent repairs to sail windows and mylar sails. U.V and salt water resistant.

 £3.78 in stock